
The most common misreading of the current CBAM rules is that the postponement of certificate sales means the obligation has been pushed back. It has not. The financial settlement has moved; the liability has not. Every tonne of CBAM-covered goods imported into the EU during 2026 is already accruing a certificate obligation that becomes payable in 2027. For trade-compliance, customs, and finance teams, CBAM 2027 compliance is therefore a 2026 data problem first and a 2027 payment problem second.
This guide sets out what actually changed under the CBAM Omnibus, the three dates that define the 2027 settlement, what the obligation costs today, and why the gap between verified supplier data and default values is where most of the avoidable cost sits.
Before you buy a single certificate, you need verified embedded-emissions data from your suppliers. Book a compliance risk assessment to understand where your 2026 CBAM exposure actually is.
What changed under the CBAM Omnibus
CBAM was established by Regulation (EU) 2023/956 and materially amended by the Omnibus simplification, Regulation (EU) 2025/2083. That amendment, in force since 20 October 2025, replaced the €150-per-consignment exemption with a 50-tonne annual threshold per importer, moved the annual declaration deadline to 30 September, delayed certificate sales to 1 February 2027, and cut the quarterly certificate-holding requirement from 80% to 50%.
The critical point for planning is what did not change. The Omnibus delayed certificate sales and the first declaration deadline, but 2026 imports are still covered. Certificate sales simply open from 1 February 2027, covering imports made throughout 2026, and there are no certificate purchases in 2026 itself. This is the difference between a deferral of payment and a deferral of liability — and only the former occurred. Our EU CBAM framework overview sets out the regulation at a foundational level; this article focuses on the 2027 settlement mechanics.
The three dates that define CBAM 2027 compliance
For an importer above the threshold, three dates in 2027 carry the whole obligation.
Date | What happens | Applies to |
|---|---|---|
1 February 2027 | CBAM certificate sales open via the common central platform | 2026 imports (settlement) |
31 March 2027 | First quarterly holding check — hold certificates for ≥50% of year-to-date embedded emissions | 2027 imports only |
30 September 2027 | First annual CBAM declaration + surrender of certificates | 2026 embedded emissions |
The 30 September 2027 declaration covers every CBAM good imported during calendar year 2026, on actual emissions or default values, with certificates surrendered for the emissions that remain after the free allocation adjustment. The quarterly 50% holding check begins 31 March 2027 and applies to goods imported since 1 January 2027 — so 2026 imports are settled in a single annual cycle, while 2027 imports carry a rolling quarterly obligation on top. Managing both cycles in parallel is where continuous supply chain due diligence stops being optional.
CBAM 2027 compliance timeline showing certificate sales and declaration deadlines
Click on image to view full
Who is in scope after the 50-tonne threshold
The Omnibus narrowed the population of obligated importers without narrowing environmental coverage. The 50-tonne annual threshold exempts roughly 90% of importers while still covering 99% of embedded emissions from CBAM-covered goods.
The covered goods are unchanged. Importers of cement, electricity, fertilisers, iron and steel, aluminium, or hydrogen into the EU must register as authorised CBAM declarants and submit annual declarations from 2027. If your net annual imports of covered goods exceed 50 tonnes, you need authorised CBAM declarant status before you continue importing — authorisation is a prerequisite, not a year-end formality. Teams coordinating this across customs and procurement often route it through their supplier and contractor management workflows so declarant status and supplier data advance together.
What a CBAM certificate costs in 2026
CBAM certificates are not a separate carbon market. For 2026 imports the Commission sets a quarterly average price based on EU ETS auction clearing prices; from 2027 onwards pricing shifts to the weekly average. Three 2026 quarterly prices have now been published:
Quarter (2026 imports) | Published | Price (€/tCO₂e) |
|---|---|---|
Q1 2026 | 7 April 2026 | 75.36 |
Q2 2026 | 6 July 2026 | 75.28 |
Q3 2026 | 5 October 2026 | 82.32 |
Q4 2026 | due 4 January 2027 | pending |
The published prices are €75.36 for Q1, €75.28 for Q2 and €82.32 for Q3 2026, with Q4 due on 4 January 2027. These are reference values; because certificates cannot be bought until February 2027, they matter now for cost forecasting, not cash outflow. Modelling that forecast properly connects directly to broader carbon accounting and sustainability and carbon compliance work.
The phase-in: why the obligation is small now and large later
The 2026 obligation is deliberately low, and that is the trap. The CBAM factor — the chargeable share of the gap between embedded emissions and the benchmark — is 2.5% in 2026 and 5% in 2027, because 97.5% of free EU ETS allocation for CBAM sectors remains in 2026 and 95% in 2027.
But the cost is not simply “emissions × 2.5%.” The free allocation adjustment is a percentage of a fixed benchmark, not of what was actually emitted — so certificates due equal embedded emissions minus (benchmark × free allocation factor) minus any carbon price already paid in the country of production. A high-carbon producer above the benchmark pays more than the headline implies; an efficient producer can owe close to zero. This is why benchmark and emissions data quality — not the certificate price — drives your real exposure.
Looking further out, a proposed EU ETS revision tabled in July 2026 (COM(2026) 616) would reintroduce 15% free allocation for CBAM sectors from 2028 and extend the full phase-out from 2034 to 2038 — but this is a proposal, not law, and it does not change the 2026 (2.5%) or 2027 (5%) factors. Treat 2026–2027 as settled and the later trajectory as subject to change.
Verified data vs. default values: the avoidable cost
Here is where CBAM 2027 compliance becomes a procurement problem. For the 2026 declaration, you can report actual verified emissions from your suppliers, or fall back on EU default values — and the defaults carry a deliberate penalty.
Default values are set by country and product, based on average emission intensity, and then marked up by 10% in 2026, 20% in 2027 and 30% from 2028. The critical variable for exposure is whether the declarant uses verified actual emissions or EU default values. In plain terms: every tonne you cannot support with verified supplier data is charged at an inflated rate. The data gap is not just an audit risk — it is a direct, quantifiable premium on your certificate bill.
CBAM 2027 compliance cost comparison of verified supplier data versus default values
Click on image to view full
The supplier data-collection problem
To report verified emissions, you need primary data from installations that may sit two or three tiers up your supply chain, often outside the EU, frequently without existing reporting processes. For a steel or aluminium importer, that can mean collecting production-route-specific emissions data from dozens of mills and smelters, validating it, and mapping it to the specific consignments you declared.
Doing this in spreadsheets and email does not scale to a 30 September deadline. The practical requirements are consistent, auditable supplier data collection and a way to collaborate with suppliers who have never produced emissions data before. CBAM sits alongside parallel EU obligations — including EU CSRD reporting — that draw on overlapping supplier evidence, which is a strong argument for collecting it once into a single source of truth rather than per-regulation.
Strategic preparation checklist
Confirm scope against the 50-tonne annual threshold across all covered goods (cement, electricity, fertilisers, iron and steel, aluminium, hydrogen).
Secure authorised CBAM declarant status before continuing imports if you are above the threshold.
Map 2026 imports to installations so each consignment can be tied to a source of embedded-emissions data.
Launch supplier data collection now — primary verified data is what removes the default-value markup.
Forecast cost using published 2026 quarterly prices and the 2.5% / 5% phase-in, modelled on benchmarks rather than gross emissions.
Prepare for two cycles: the single 2026 annual settlement (due 30 September 2027) and the rolling quarterly 50% holding on 2027 imports (first check 31 March 2027).
Centralise evidence so the annual declaration is assembled from a controlled dataset, not reconstructed under deadline.
How Certivo supports CBAM 2027 compliance
The hardest part of CBAM 2027 compliance is not the certificate mechanics — it is assembling verified embedded-emissions data from a multi-tier supplier base before the declaration window. Certivo is built for exactly that collection-and-evidence problem.
Certivo’s platform capabilities support automated supplier data collection, document parsing, and centralised evidence management, so that emissions data arrives in a structured, auditable form rather than scattered across inboxes. CORA, Certivo’s compliance intelligence layer, helps track regulatory change — such as the shift from quarterly to weekly pricing in 2027 and proposed phase-in revisions — so teams move from reacting at deadlines toward continuous readiness. Certivo does not calculate your certificates for you or guarantee compliance; it gives compliance, procurement, and sustainability teams a shared, defensible dataset to declare from.
CBAM 2027 compliance starts with the data you collect in 2026. 3wr to see how Certivo helps you collect verified embedded-emissions data from suppliers — or request a compliance risk assessment to map your current CBAM exposure.
Hariprasanth
Hariprasanth is a Chemical Compliance Specialist with nearly four years of experience, underpinned by a degree in Chemical Engineering. He brings in-depth expertise in global product compliance, working across key regulations such as REACH, RoHS, TSCA, Proposition 65, POPs, FMD, and PFCMRT.
Hariprasanth specializes in reviewing technical documentation, validating supplier inputs, and ensuring that products consistently meet regulatory standards. He works closely with cross-functional teams and suppliers to collect accurate material data and deliver clear, audit-ready compliance reports that stand up to scrutiny.
Through his strong analytical skills and regulatory insight, Hariprasanth enables organizations to navigate evolving compliance challenges while aligning with sustainability initiatives in an increasingly dynamic regulatory environment.


