Latest News

Latest News

EU POPs Restrictions 2026: New MCCP and Long-Chain PFAS Limits Manufacturers Must Meet

EU POPs Restrictions 2026: New MCCP and Long-Chain PFAS Limits Manufacturers Must Meet

EU POPs Restrictions 2026: New MCCP and Long-Chain PFAS Limits Manufacturers Must Meet

Hariprasanth

Hariprasanth

Hariprasanth

Hariprasanth

Calendar

EU POPs Restrictions 2026: New MCCP and Long-Chain PFAS Limits Manufacturers Must Meet
EU POPs Restrictions 2026: New MCCP and Long-Chain PFAS Limits Manufacturers Must Meet

The EU POPs restrictions 2026 update adds two industrially significant substance groups to the EU's Persistent Organic Pollutants (POPs) Regulation: medium-chain chlorinated paraffins (MCCPs) and long-chain perfluorocarboxylic acids (C9–C21 PFCAs, a subclass of PFAS). The European Commission adopted both amendments in September 2026, and the new controls are set to apply from 16 December 2026. For manufacturers of electronics, textiles, plastics, rubber, cables, and coatings, substances that were previously managed under REACH — or not tracked at all — now carry an EU-wide prohibition with strict concentration limits.

This guide explains what changed, the exact thresholds and exemptions, which products are affected, and the practical steps compliance teams should take before the December 2026 application date.

What changed under the EU POPs Regulation

The EU POPs Regulation — Regulation (EU) 2019/1021 — bans or restricts persistent organic pollutants in substances, mixtures, and articles across the EU, implementing the EU's commitments under the Stockholm Convention. In 2026, the Commission used its delegated powers under Article 15(1) to add two new substance groups to Part A of Annex I:

  • Long-chain perfluorocarboxylic acids (LC-PFCAs) — C9–C21, their salts and related compounds — adopted 7 September 2026.

  • Medium-chain chlorinated paraffins (MCCPs) — C14–C17 — adopted 11 September 2026.

Both amendments are scheduled to apply from 16 December 2026, aligning with the date the corresponding Stockholm Convention amendments take effect. Each delegated regulation enters into force on the twentieth day after its publication in the Official Journal; publishers should confirm the final OJ reference before the article goes live. A third substance from the same cycle — the pesticide chlorpyrifos — was handled in a separate act and is less relevant to most product manufacturers.

These additions extend the EU's POPs framework further into everyday industrial materials, which is why teams that have historically focused on REACH and RoHS now need POPs on their radar.

Why these substances moved from watch-lists to a ban

The listings originate from the 2025 Stockholm Convention Conference of the Parties (COP-12, April–May 2025), which added MCCPs, long-chain PFCAs, and chlorpyrifos to Annex A (elimination). The EU POPs Regulation is the mechanism that converts those international decisions into directly applicable EU law.

The shift matters because it changes the type of obligation:

  • MCCPs were already a REACH Substance of Very High Concern (SVHC) since 2021 — a disclosure-and-authorisation regime. Under POPs, they move to a near-total prohibition with a low trace-level ceiling.

  • Long-chain PFCAs overlap with an existing REACH restriction, but the POPs listing is broader in scope and consolidates the obligation under a single regulation.

In short, substances that compliance teams could previously track on a watch-list now trigger a hard limit on manufacturing, placing on the market, and use.

Long-chain PFCAs (C9–C21): scope, limits, and the REACH overlap

The long-chain PFCA listing covers linear and branched C9–C21 PFCAs (general formula CnF2n+1COOH, where 8 ≤ n ≤ 20), their salts, and related compounds — substances that may degrade or transform into C9–C21 PFCAs — in substances, mixtures, and articles. Because "related compounds" are included, the practical scope reaches well beyond intentionally added PFCAs into precursors and residues.

Long-chain PFCA control

Limit

Applies to

Sum of C9–C21 PFCAs and their salts (unintentional trace contaminant)

0.025 mg/kg

Substances, mixtures, articles

Sum of C9–C21 PFCA-related compounds (unintentional trace contaminant)

0.26 mg/kg

Substances, mixtures, articles

Fluoroplastics/fluoroelastomers with perfluoroalkoxy groups and PTFE micropowders — C9–C14

0.1 mg/kg

Derogation until 16 Dec 2030

Same products — C15–C21

15 mg/kg

Derogation until 16 Dec 2030

After 16 December 2030, the C9–C14 limit applies to all C9–C21 PFCAs for those fluoropolymer products, closing the temporary derogation.

A critical cross-framework point: C9–C14 PFCAs are already restricted under entry 68 of Annex XVII to REACH. To avoid duplicate rules, the Commission intends to remove that REACH entry once the POPs act applies. Teams that mapped these substances only to REACH need to re-point their internal controls to the POPs Regulation — a detail many fast-turnaround news summaries omit. For context on how SVHC and Annex XVII obligations evolve, see our explainer on REACH SVHC and Annex XVII changes.

EU POPs long-chain PFCA C9–C21 concentration limits and fluoropolymer derogation.

Click on image to view full

Medium-chain chlorinated paraffins (MCCPs): scope and limits

MCCPs are chlorinated paraffins with carbon chain lengths of C14–C17, historically used as plasticisers and flame retardants in flexible PVC, cables, rubber, sealants, adhesives, paints, and metalworking fluids.

Key requirements under the POPs listing:

  • General limit: MCCPs present as an unintentional trace contaminant are capped at 1,000 mg/kg (0.1% by weight) in substances, mixtures, and articles.

  • Safety Data Sheet obligation: Manufacturers, suppliers, and importers placing chlorinated paraffins on the market must provide information on MCCP concentrations in the Safety Data Sheet.

  • Time-limited derogations: Narrow exemptions apply for specific uses — for example, MCCPs used as extreme-pressure additives in certain heavy-duty metalworking fluids are exempt until 31 December 2036, and a limited spare-parts derogation applies with its own long-stop date.

Because MCCPs were already a REACH SVHC, many organisations have partial visibility. The POPs listing raises the stakes: it is no longer a disclosure threshold but a market-access limit.

Which products and industries are in scope

The two listings together touch a wide span of manufactured goods. Likely exposure points include:

  • Electronics and electrical equipment: fluoropolymer insulation, wiring, connectors, and coatings; flexible PVC cabling with chlorinated paraffins. Teams tracking PFAS in electronics supply chains should extend screening to C9–C21 PFCAs.

  • Textiles and coatings: durable water-repellent finishes and surface treatments where long-chain PFCAs may appear as residues or degradation products.

  • Plastics, rubber, and sealants: MCCPs as plasticisers or flame retardants in PVC trims, films, imitation leather, and rubber components.

  • Industrial fluids and machinery: MCCPs in metalworking fluids and lubricants.

  • Fluoropolymer processing: fluoroplastics, fluoroelastomers, and PTFE micropowders subject to the temporary C15–C21 derogation.

For most manufacturers, exposure is not a single component but a pattern spread across a bill of materials, which is what makes screening difficult.

Key dates: the EU POPs compliance timeline

Date

Milestone

April–May 2025

Stockholm COP-12 lists MCCPs, long-chain PFCAs (and chlorpyrifos) in Annex A

21 Nov 2025

EU Commission publishes draft delegated acts for consultation (closed 19 Dec 2025)

7 Sep 2026

Commission adopts the long-chain PFCA delegated regulation

11 Sep 2026

Commission adopts the MCCP delegated regulation

16 Dec 2026

Both listings apply — manufacture, placing on the market, and use restricted

16 Dec 2030

Long-chain PFCA derogation for certain fluoropolymers ends

31 Dec 2036

MCCP exemption for extreme-pressure metalworking fluid additives ends

The near-term pressure point is clear: 16 December 2026. Exemptions buy time only for narrowly defined uses, not for general product portfolios.

The compliance challenge: data, not interpretation

The rules themselves are specific. The difficulty is operational — proving, at scale, that products stay under trace-level limits. Three problems recur:

  1. Trace-level thresholds require real supplier data. A 0.025 mg/kg limit for PFCAs or a 0.1% limit for MCCPs cannot be confirmed by assumption. It requires substance-level declarations and, where relevant, test evidence from suppliers.

  2. "Related compounds" widen the question. Because precursors and degradation products are in scope for PFCAs, a simple "do you use PFOA?" question is no longer sufficient.

  3. Overlapping frameworks create rework. The same component can sit under POPs, PFAS restrictions, and REACH at once. Without a single source of truth, teams re-collect the same evidence for each regulation.

This is where manual, spreadsheet-based programmes break down — and why many manufacturers are moving toward continuous, chemical and hazmat compliance systems that screen at the BOM level.

Workflow to screen a BOM against EU POPs and PFAS restrictions for compliance.

Click on image to view full

How to prepare before 16 December 2026

A practical sequence for compliance, quality, and procurement teams:

  1. Identify in-scope materials. Flag PVC, cables, rubber, sealants, coatings, textiles, fluoropolymers, and metalworking fluids across the product portfolio.

  2. Map substances to the BOM. Connect MCCP and C9–C21 PFCA risk to specific parts, suppliers, and finished products rather than tracking at company level.

  3. Request substance-level supplier data. Collect declarations that address C9–C21 PFCAs, their salts, and related compounds — not just legacy PFOA questions.

  4. Re-point REACH controls. Update internal rules that mapped C9–C14 PFCAs to REACH Annex XVII entry 68 toward the POPs Regulation, anticipating the removal of that entry.

  5. Check derogation eligibility. Confirm whether any product genuinely qualifies for the fluoropolymer or metalworking-fluid derogations, and record the expiry dates.

  6. Maintain audit-ready evidence. Keep declarations, test reports, and SDS information organised so a market-surveillance request can be answered quickly.

For teams still consolidating supplier documentation, this is also a natural point to move from reactive collection to continuous monitoring.

How Certivo helps manufacturers manage POPs and PFAS restrictions

Certivo is an AI-native product compliance platform built for exactly this problem: screening complex bills of materials against many overlapping regulations at once. Its compliance engine, CORA, is a deterministic AI engine — designed to produce traceable, source-linked results rather than probabilistic guesses — covering 150+ regulations and standards, including POPs, PFAS, and REACH.

In practice, that means:

  • BOM-level screening that maps each part and supplier to the specific substances and limits that apply, so MCCP and C9–C21 PFCA exposure surfaces at the product level.

  • Automated supplier data collection through campaigns that request substance-level declarations and chase responses — with multilingual outreach for global supply chains.

  • Regulatory change monitoring that re-screens affected BOMs when a regulation changes and flags the products that need attention, supporting a shift from periodic checks to continuous readiness.

  • Audit-ready evidence that keeps declarations, validations, and documentation organised for market-surveillance requests.

Certivo also supports custom restricted-substance lists, so internal specifications and customer-specific requirements are screened alongside statutory rules like POPs and REACH. The platform integrates with existing PLM and ERP systems (for example SAP, Oracle, PTC Windchill, and Siemens Teamcenter) through its API, and your team stays in control of final decisions. For organisations also tracking materials and environmental compliance and the broader move toward EU POPs limits and digital product passports, that single source of truth removes much of the duplicated effort.

Screen your BOM against POPs and PFAS restrictions automatically

The December 2026 limits reward teams that can see substance exposure across their whole portfolio — and penalise those relying on spreadsheets. Book a demo or request a compliance review to see how Certivo screens your BOM against POPs, PFAS, and REACH restrictions and automates supplier data collection before the deadline.

FAQs

FAQs

When do the new EU POPs restrictions on MCCPs and long-chain PFAS apply?

The European Commission adopted the two delegated regulations in September 2026, and the controls are scheduled to apply from 16 December 2026, in line with the Stockholm Convention amendments. Each regulation enters into force 20 days after its publication in the Official Journal of the European Union.

What are the concentration limits for long-chain PFCAs under the POPs Regulation?

The general unintentional trace contaminant limits are 0.025 mg/kg for the sum of C9–C21 PFCAs and their salts, and 0.26 mg/kg for related compounds. Certain fluoropolymers have a temporary limit of 15 mg/kg for C15–C21 PFCAs until 16 December 2030.

What is the MCCP limit under the EU POPs Regulation?

MCCPs (C14–C17) present as an unintentional trace contaminant are limited to 1,000 mg/kg (0.1% by weight) in substances, mixtures, and articles. Suppliers placing chlorinated paraffins on the market must state MCCP concentrations in the Safety Data Sheet, and narrow time-limited derogations apply to specific uses.

How does the long-chain PFCA listing relate to the existing REACH restriction?

C9–C14 PFCAs are already restricted under entry 68 of REACH Annex XVII. The POPs listing is broader (C9–C21), so the Commission intends to remove the REACH entry to avoid duplication. Teams should re-point internal controls to the POPs Regulation.

Which products and industries are most affected by the EU POPs restrictions 2026?

Electronics and cabling, textiles and coatings, flexible PVC and rubber, sealants and adhesives, metalworking fluids, and fluoropolymer processing are the most exposed. Because exposure is usually spread across a bill of materials, BOM-level screening and supplier data collection are the practical priorities.

When do the new EU POPs restrictions on MCCPs and long-chain PFAS apply?

The European Commission adopted the two delegated regulations in September 2026, and the controls are scheduled to apply from 16 December 2026, in line with the Stockholm Convention amendments. Each regulation enters into force 20 days after its publication in the Official Journal of the European Union.

What are the concentration limits for long-chain PFCAs under the POPs Regulation?

The general unintentional trace contaminant limits are 0.025 mg/kg for the sum of C9–C21 PFCAs and their salts, and 0.26 mg/kg for related compounds. Certain fluoropolymers have a temporary limit of 15 mg/kg for C15–C21 PFCAs until 16 December 2030.

What is the MCCP limit under the EU POPs Regulation?

MCCPs (C14–C17) present as an unintentional trace contaminant are limited to 1,000 mg/kg (0.1% by weight) in substances, mixtures, and articles. Suppliers placing chlorinated paraffins on the market must state MCCP concentrations in the Safety Data Sheet, and narrow time-limited derogations apply to specific uses.

How does the long-chain PFCA listing relate to the existing REACH restriction?

C9–C14 PFCAs are already restricted under entry 68 of REACH Annex XVII. The POPs listing is broader (C9–C21), so the Commission intends to remove the REACH entry to avoid duplication. Teams should re-point internal controls to the POPs Regulation.

Which products and industries are most affected by the EU POPs restrictions 2026?

Electronics and cabling, textiles and coatings, flexible PVC and rubber, sealants and adhesives, metalworking fluids, and fluoropolymer processing are the most exposed. Because exposure is usually spread across a bill of materials, BOM-level screening and supplier data collection are the practical priorities.

Table of Contents
No headings found on page
Table of Contents
No headings found on page

See how Certivo can automate compliance for your business.

See how Certivo can automate compliance for your business.

See how Certivo can automate compliance for your business.

Book a demo

Book a demo

Hariprasanth

Hariprasanth is a Chemical Compliance Specialist with nearly four years of experience, underpinned by a degree in Chemical Engineering. He brings in-depth expertise in global product compliance, working across key regulations such as REACH, RoHS, TSCA, Proposition 65, POPs, FMD, and PFCMRT.

Hariprasanth specializes in reviewing technical documentation, validating supplier inputs, and ensuring that products consistently meet regulatory standards. He works closely with cross-functional teams and suppliers to collect accurate material data and deliver clear, audit-ready compliance reports that stand up to scrutiny.