
A TSCA significant new use rule is one of the most misunderstood tools EPA has — and one of the easiest to trip over. It is not a ban. It does not pull a chemical off the market. What it does is quieter and, for manufacturers, often more operationally disruptive: it requires you to notify EPA at least 90 days before you manufacture, import, or process a listed substance for a use EPA has designated as “significant and new.” Until EPA reviews that notice and acts, the new use cannot begin.
For chemical compliance, product stewardship, and R&D/formulation leads, that mechanism turns ordinary business decisions — a reformulation, a substitute material, a new supplier or sourcing region — into potential regulatory triggers. This guide explains how SNURs actually work, uses the proposed flame-retardant SNUR (TCEP, TBBPA, TPP) as the live example, and shows how to find affected substances across your bill of materials before a change forces an unplanned filing.
Before a sourcing or formulation change triggers a notice, map your exposure. Book a Compliance Risk Assessment to flag SNUR-affected substances across your BOM.
Minimal illustration of a TSCA significant new use rule notification concept
What a TSCA Significant New Use Rule Actually Is
Under TSCA Section 5(a)(2), EPA can determine by rule that a use of a chemical substance is a “significant new use” after considering all relevant factors. Once a use is designated, anyone subject to the SNUR must notify EPA at least 90 days before commencing any manufacturing (including import) or processing of the substance for that significant new use.
The notice itself is a Significant New Use Notice (SNUN). Critically, filing is not permission. After EPA receives the notification, it must review and make an affirmative determination, and put any necessary restrictions in place before the significant new use can commence. This “notify before you use” design is what makes SNURs so different from a prohibition — the pathway stays legally open, but it runs through EPA first.
For a broader view of how this sits within federal chemical law, see Certivo’s TSCA compliance framework page, and the adjacent REACH and RoHS overviews for cross-jurisdiction context.
SNUR vs. Ban vs. Section 8 Reporting
Three TSCA mechanisms get confused constantly. Keeping them distinct is the first step to accurate compliance.
Mechanism | What it does | Timing | Example |
|---|---|---|---|
Section 5 SNUR | Requires a 90-day notice before a new use | Prospective (before you act) | Flame-retardant SNUR (proposed) |
Outright ban | Prohibits manufacture/use entirely | N/A | Not what a SNUR is |
Section 8(a)(7) reporting | Reports past/ongoing activity to EPA | Retrospective (after the fact) | PFAS reporting rule |
A law firm summary put it plainly: issuing a SNUR is not a risk determination itself, only a notification requirement for significant new uses, so EPA has the opportunity to review the notice and make a Section 5(a)(3) risk determination.
If your team already tracks the retrospective side, Certivo’s analysis of TSCA Section 8(a)(7) PFAS reporting and how AI handles 12,000+ PFAS compounds under Section 8(a)(7) shows how different the reporting obligation is from the Section 5 notice obligation covered here.
The Flame-Retardant SNUR: TCEP, TBBPA, and TPP
The clearest live example of a TSCA significant new use rule targeting specific chemicals of concern is EPA’s proposed flame-retardant SNUR. EPA proposed SNURs for three flame retardants undergoing TSCA Section 6 risk evaluations: tris(2-chloroethyl) phosphate (TCEP), CASRN 115-96-8; tetrabromobisphenol A (TBBPA), CASRN 79-94-7; and triphenyl phosphate (TPP), CASRN 115-86-6.
Two points matter for accuracy:
It is a proposal, not a final rule. The rule was published as a proposed rule on June 22, 2023 under docket EPA-HQ-OPPT-2023-0012, and EPA’s 2026 regulatory agenda still carries it as a proposed action (RIN 2070-AL07), with the proposed rule issued June 22, 2023. Treat it as pending until EPA finalizes.
It targets “non-ongoing” uses. The proposed significant new uses are manufacture (including import) or processing for any use, except the conditions of use EPA expects to consider within the scope of the Section 6 risk evaluations, which are not proposed as significant new uses.
The hazard context is real: EPA released its final risk evaluation for TCEP in September 2024 and determined the chemical poses an unreasonable risk to human health and the environment, while TBBPA reached a draft risk evaluation stage in June 2026. Because TBBPA is widely used in electronics manufacturing (plastics and printed circuit boards), this SNUR has direct relevance for electronics supply chains — a theme Certivo explores in tracking substances across the electronics supply chain.
Comparison of TSCA Section 5 significant new use rule versus a ban versus Section 8 reporting
SNUR requires notification 90 days before use, Ban means prohibited, and Section 8 requires reporting after use.
Click on image to view full
EPA’s 2026 SNUR Cadence and the “Ongoing Use” Cutoff
Beyond the flame retardants, EPA issues routine SNUR batches on new chemicals that came through premanufacture notices (PMNs) and Section 5(e) Orders. Two recent examples are often mistaken for the flame-retardant rule — they are separate rulemakings:
Proposed batch “26-7” (Nov 2, 2026): In FR Doc 2026-22295 (91 FR 68894), EPA designated November 2, 2026 as the cutoff date for determining whether a new use is ongoing. These are PMN/Order-based substances, not flame retardants. federalregister
Final batch “26-1” (Oct 15, 2026): EPA finalized SNURs for 19 chemical substances, requiring at least 90 days’ notice before designated significant new uses, effective December 14, 2026; the package adds 40 CFR §§ 721.12260–721.12278.
The practical lesson: “a SNUR” is rarely one event. It is a continuous stream of designations. Staying current requires regulatory change management rather than one-time checks — exactly the kind of monitoring Certivo frames in managing compliance risk proactively.
Do SNURs Apply to Imported Articles?
This is the question that catches importers off guard. Article treatment is rule-specific, and EPA sometimes removes the usual article exemption. In the flame-retardant proposal, EPA noted that under one alternative, the import and processing of articles containing TCEP, TBBPA, and TPP would not be exempt from significant new use notification requirements.
For manufacturers importing finished goods, sub-assemblies, or components, that means a SNUR can reach you even if you never handle the raw chemical. Confirming whether listed substances are present in incoming articles depends on supplier data collection and material disclosures — a workflow Certivo addresses through streamlined supplier documentation and chemical and hazmat compliance.
How a Sourcing or Formulation Change Triggers a SNUN
Here is where SNURs quietly constrain the business. Because a designated use requires a 90-day notice, routine engineering and procurement decisions can become regulatory events:
Reformulation that introduces a listed substance into a use EPA treats as “new.”
Substitution that resumes a use previously phased out.
New supplier or region that changes the condition of use or the form in which a substance enters your products.
In the absence of a SNUR, manufacturing, import, or processing for these significant new uses could begin at any time without prior notice to EPA; the SNUR is what gives EPA the opportunity to review and address potential risks first. For compliance engineers, the risk is a stalled product change — a 90-day clock that nobody budgeted for. A parallel flame-retardant restriction trend is visible in Certivo’s Canada DP and DBDPE toxic substances guide.
Struggling to see which product changes could trigger a notice? Book a Compliance Risk Assessment to map SNUR exposure before you commit a change.
Finding SNUR-Affected Substances Across Your BOM
The hardest part of SNUR compliance is detection: knowing which products, parts, and sub-assemblies contain a listed substance across thousands of line items. Spreadsheets and email cannot answer that reliably at portfolio scale.
A workable approach uses BOM-level compliance intelligence: map substances to parts, cross-reference against Section 5 designations, and flag affected products the moment a change — or a new SNUR batch — lands. Certivo’s track compliance by BOM and materials and environmental compliance capabilities are built for this kind of substance-to-product traceability.
Compliance Preparation Checklist
✅ Inventory listed substances — identify TCEP, TBBPA, TPP, and other SNUR-designated substances across your product portfolio and incoming articles.
✅ Separate Section 5 from Section 8 — treat SNUR notice obligations distinctly from Section 8(a)(7) reporting obligations.
✅ Screen changes in advance — run sourcing, substitution, and reformulation decisions against current SNUR designations before committing.
✅ Collect supplier confirmations — verify whether imported articles contain listed substances.
✅ Monitor new batches — track proposed and final SNUR Federal Register notices continuously, not annually.
✅ Document due diligence — maintain audit-ready documentation of screening and notices.
How AI Helps Manage SNUR Exposure at Scale
Manual SNUR tracking fails for the same reason manual PFAS tracking fails: volume and change velocity. AI-powered product compliance management closes the gap in three ways.
First, regulatory change management monitors proposed and final SNUR batches and maps them to your substances. Second, AI document parsing extracts substance data from supplier declarations and certificates so you know what’s actually in your articles. Third, BOM-level screening flags affected products instantly when a designation changes.
Within Certivo, CORA-powered regulatory intelligence supports this monitoring-and-mapping layer, helping teams move from reactive, one-off checks toward continuous readiness. Explore the underlying capabilities on Certivo’s features page.
Get complete visibility into your Section 5 exposure. Book a Compliance Risk Assessment to see where SNUR-affected substances sit across your products and suppliers.
Shivani
Shivani is an accomplished Climate-Tech professional specializing in bridging technical Life Cycle Assessment (LCA) with global ESG compliance requirements. With expertise in climate intelligence, LCA data, and sustainability frameworks, she helps manufacturing and agribusiness firms navigate the growing complexity of environmental reporting, ESG assurance, and global market requirements.
She currently serves as an LCA Expert Advisor at CarbonBright AI, where she develops and refines Life Cycle Inventory (LCI) datasets and emission factor libraries. Her work focuses on ensuring that SaaS-based carbon management platforms align with globally recognized frameworks and standards, including the GHG Protocol, ISO 14044, EN 15804, and ISO 21930.
Shivani also brings specialized experience in the agri-food sector, having played a key role in Mondra’s transition from research-led services to a scalable, productized climate intelligence platform. Her work has focused particularly on high-impact categories such as meat and dairy, contributing to the development and application of climate intelligence within these complex sectors.
Her technical approach is further supported by a strong research-driven foundation, including collaboration with world-class projects such as the Hestia Project at the University of Oxford. This combination of technical LCA expertise, climate intelligence, and practical experience enables her to contribute to the development of scalable solutions that connect environmental data with evolving global ESG and sustainability requirements.

